Iskena esibambe ngesandla se3d- 3DSHANDY-22LS
題-16.jpg)
題-16-300x240.jpg)
題-15-300x240.jpg)
Ukwaziswa kwe-laser ephathwayo ye-3D scanner
Iimpawu ze-3DSHANDY-22LS
I-3DSHANDY-22LS yamkele uyilo olubambe ngesandla lwamva nje, inobunzima obulula (0.92kg), kwaye ilungele ukusetyenziswa.
Inemigca ye-laser ye-14 + eyongezelelweyo i-1 ye-beam yokuskena umngxuma onzulu + i-7 eyongezelelweyo ye-beam ukuskena iinkcukacha, iyonke imigca ye-laser ye-22.
Inesantya sokuskena esikhawulezayo, ukuchaneka okuphezulu, uzinzo olomeleleyo, iikhamera ezimbini zemizi-mveliso, itekhnoloji yokumakisha ezenzekelayo, isoftware yokuskena eziphuhlisileyo, kunye nokuchaneka kokuskena okuphezulu kunye nokusebenza kakuhle.
Isetyenziswe ngokubanzi kwintsimi yobunjineli obubuyisela umva kunye nokuhlola okuthathu. Inkqubo yokuskena iyaguquguquka kwaye ifanelekile, ifanelekile kwiimeko ezahlukeneyo zesicelo.
● Ukuchaneka okuphezulu
Ukuchaneka komlinganiselo womatshini omnye kuphezulu njenge-0.01mm, kwaye izinto ezinkulu neziphakathi zinokuskenwa ngokulula ngaphandle koncedo lwenkqubo yefotogrammetric.
● Umthombo wokukhanya
Imigca ye-laser ye-22 eluhlaza okwesibhakabhaka, isantya sokuskena ngokukhawuleza kunye nokuchaneka okuphezulu
● Ukulinganisa ngokukhawuleza
Inani lamanqaku okumakisha liqingqelwe, imigca ye-laser eyi-14 + ubunzulu obu-1 bokuskena + 7 iinkcukacha zokuskena
● Imowudi entle
Tshintshela phakathi kwemowudi ecolekileyo kunye nenye yelaser ukuskena ngokulula imiphezulu entsonkothileyo kunye neekona ezifileyo zemingxuma enzulu
● Ukusebenza okuguquguqukayo
Uyilo lwemizi-mveliso, ubungakanani obuncinci, ubunzima obulula (0.92kg), buguquguqukayo kwaye bulungele, kulula ukusebenza, buphucula kakhulu ukusebenza kakuhle, uphando olutsha oluzimeleyo kunye neteknoloji yophuhliso iqinisekisiwe.
● Ukuba bhetyebhetye
Ukusebenza kwesandla esinye, akuchatshazelwa kukusingqongileyo, akukhawulelwanga kwisakhiwo somsebenzi kunye nobuchule bomsebenzisi
● Ukubona ngexesha lokwenyani
Isikrini sekhompyuter sibonisa ujongano lokusebenza ngexesha lokwenyani ukujonga ngokuchanekileyo iziphene kunye nokwenza izinto ezishiyiweyo
● Uyilo lwemizi-mveliso
Ubunzima bokukhanya (0.92kg), kulula ukuthwala, ukulungele ukusebenzisa, ukusebenza kakuhle, uphando oluzimeleyo oluhlaziyiweyo kunye nophuhliso lwetekhnoloji luqinisekisiwe.
Iimeko zesicelo
Ushishino lweemoto
· Uhlalutyo lwemveliso ekhuphisanayo
· Ukuguqulwa kwemoto
· Ukwenza umhombiso ngokwezifiso
· Imodeli kunye noyilo
· Ulawulo lomgangatho kunye nokuhlolwa kwamacandelo
· Ukulinganisa kunye nohlalutyo lwento ephelayo
Ukwenziwa kwezixhobo
· Indibano ebonakalayo
· Buyisa ubunjineli
· Ulawulo lomgangatho kunye nokuhlolwa
· Uhlalutyo lokunxiba kunye nokulungiswa
· Iijigi kunye noyilo lwezixhobo,uhlengahlengiso
Aeronautics
· Ukwenza umfanekiso okhawulezayo
· Uhlalutyo lwe-MRO kunye nomonakalo
· Uhlalutyo lwe-Aerodynamics kunye noxinzelelo
· Ukuhlolwa nohlengahlengisoyofakelo lwamalungu
Ushicilelo lwe-3D
· Ukuhlolwa kokubumba
· Ukubuyisela umva uyilo lokubumba ukwenza idatha yeCAD
· Phelisa uhlalutyo lokuthelekisa iimveliso
· Idata eskeniweyo inokusetyenziselwa ushicilelo lwe-3D ngokuthe ngqo
Enye Indawo
· Uphando lwezemfundo nolwenzululwazi
· Unyango kunye nempilo
· Uyila umva
· Uyilo lweshishini
| Imodeli yemveliso | 3DSHANDY-22LS | ||
| Umthombo wokukhanya | Imigca ye-laser engama-22 eluhlaza okwesibhakabhaka (ubude bobude: 450nm) | ||
| Isantya sokulinganisa | 1,320,000points/s | ||
| Imowudi yokuskena | Imo esemgangathweni | Imodeli yomngxuma onzulu | Imowudi echanekileyo |
| I-14 yawela imigca yelaser eluhlaza | Umgca we-1 blue laser | Imigca ye-laser e-7 ehambelanayo | |
| Ukuchaneka kwedatha | 0.02mm | 0.02mm | 0.01mm |
| Ukuskena umgama | 330mm | 330mm | 180mm |
| Ukuskena ubunzulu bommandla | 550mm | 550mm | 200mm |
| Isigqibo | 0.01mm (ubukhulu) | ||
| Indawo yokuskena | 600×550mm (ubukhulu) | ||
| Ukuskena uluhlu | 0.1-10 m (inokwandiswa) | ||
| Ukuchaneka komthamo | 0.02+0.03mm/m | ||
| 0.02+0.015mm/m Idityaniswe ne-HL-3DP 3D inkqubo yefotogrammetry (ukhetho) | |||
| Inkxaso yeefomathi zedatha | asc, stl, ply, obj, igs, wrl, xyz, txt njl., enokwenziwa ngokwezifiso | ||
| Isoftware ehambelanayo | Iinkqubo ze-3D (i-Geomagic Solutions), i-InnovMetric Software (i-PolyWorks), i-Dassault Systemes (i-CATIA V5 kunye ne-SolidWorks), i-PTC (i-Pro / ENGINEER), i-Siemens (i-NX kunye ne-Solid Edge), i-Autodesk (i-Inventor, i-Alias, i-3ds Max, i-Maya, i-Softimage) , njl. | ||
| Ukuhanjiswa kwedatha | USB3.0 | ||
| Ubumbeko lwekhompyuter (uyazikhethela) | Win10 64-bit; Imemori yevidiyo: 4G; iprosesa: I7-8700 okanye ngaphezulu; inkumbulo: 64 GB | ||
| Inqanaba lokhuseleko lweLaser | UdidiⅡ (Ukhuseleko lwamehlo omntu) | ||
| Inombolo yoQinisekiso (Isatifikethi seLaser): LCS200726001DS | |||
| Ubunzima bezixhobo | 920g | ||
| Ubungakanani bangaphandle | 290x125x70mm | ||
| Ubushushu / ukufuma | -10-40℃; 10-90% | ||
| Umthombo wamandla | Igalelo: 100-240v, 50/60Hz, 0.9-0.45A; Imveliso: 24V, 1.5A, 36W(ubuninzi) | ||
?
?
題-1-300x200.jpg)