Resin-SZUV-W8006-e t?oeu ka mokhoa o makatsang
Kenyelletso ea Lisebelisoa tsa Khatiso tsa 3D
Lit?obotsi
SZUV-W8006??
TLHALOSO EA SEHLAHISOA
SZUV-W8006 ke ABS e kang SL resin e nang le likarolo tse nepahetseng le tse t?oarellang. E etselitsoe sethala se tiileng sa SLA. SZUV-W8006 e ka sebelisoa ka mekhoa e metle, mehlala ea mehopolo, likarolo tse akaretsang le li-prototype tse sebetsang lebaleng la indasteri ea likoloi, tsa bongaka le tsa bareki. Moaho oa likarolo tse t?oarellang ka SZUV-W8006 o feta likhoeli tse 6.5.
?
MOEKETSILIKAROLOANA
-Liquid resin e na le viscosity e bohareng, e bonolo haholo bakeng sa ho hloekisoa hape, ho bonolo ho hloekisa likarolo le mechini
- Matla a ntlafalitsoeng a bolokoa, ho boloka litekanyo tse ntlafalitsoeng tsa likarolo tse maemong a mongobo
- U hloka ho qeta karolo e nyane
-Bophelo ba nako e telele mochining
?
?MOEKETSIMOLEMO
- E hloka nako e fokolang ea ho qeta, ho bonolo ho e phekola
- Ho aha likarolo tse nepahetseng le tse thata tse phahameng ka botsitso bo ntlafalitsoeng ba sebopeho
- Litaolo tsa boleng bo holimo bakeng sa likarolo tsa vacuum casting
- Ho honyela ho tlase mme ho hanyetsana hantle le mosehla
-Mmala o mosweu o kgabane
- Lintho tse ikhethang tsa SLA tse ka sebelisoang
?Thepa ea 'Mele - Lintho tse Mokelikeli
| Ponahalo | Bosoeu |
| Botenya | 1.13g/cm3@25 ℃ |
| Viscosity | 376 cps @ 27 ℃ |
| Dp | 0.148 limilimithara |
| Ec | 7.8 mJ/cm2 |
| Botenya ba lera la mohaho? | 0.1 limilimithara |
?Tlhokomeliso: mocheso oa szuv-w8006 ha oa lokela ho ba o phahameng haholo. Ka kopo e sebelise ka tlase ho 25 ℃. Mocheso o khothalletsoang hore o sebelisoe le ho o boloka ke 18-25 ℃.
Ho T?oara le ho Boloka
(1) Mehato ea botekgeniki ea kalafo ea ts'ebetso
Qoba ho kopana le mahlo, letlalo le liaparo. U se ke ua hema moholi kapa mouoane, u se ke ua koenya ka phoso, boloka setshelo se koetsoe ka thata ka mor'a ho hloekisa ka ho feletseng.
(2) Ho na le moea o sa fellang kapa o felletseng, boloka moea o lekaneng
(3) Ts'ebetso e bolokehileng e hlokang tlhokomelo Ha ho mosi, ha ho mollo
(4) Maemo a bolokehileng a polokelo
E bolokoa sebakeng se phodileng, se nang le moea o pholileng, hole le mocheso, litlhase le malakabe. Boloka setshelo se koetsoe ka thata ho fihlela se sebelisoa.
(5) setshelo sa ho paka le thepa
Ha u ntse u le litlamong, ka kopo u se ke ua fetisetsa lijaneng tse ling. Se ke oa khutlela ho linkho tsa pele tsa lihlahisoa tse tla sebelisoa.
Mehlala
Linyeoe tsa Kopo
Thuto
Mohlala o potlakileng
Likarolo tsa Auto
Moralo oa kaho
Moqapi oa Lit?oant?o
Bongaka
Thepa ea Sebele (Mokelikeli)
| Ponahalo | Bosoeu |
| Botenya | 1.13g/cm3@25 ℃ |
| Viscosity | 376 cps @ 27 ℃ |
| Dp | 0.148 limilimithara |
| Ec | 7.8 mJ/cm2 |
| Botenya ba lera la mohaho | 0.1 limilimithara |
Mechanical Properties (Kamora ho Phekoa)
| LEKOLA | TEKO MOKHOA | VALUE |
| Pheko ea kamora metsotso e 90 ea UV | ||
| Hardness, Shore D | ASTM D2240 | 87 |
| Flexural modulus, Mpa | ASTM D790 | 2,592-2,675 |
| Flexural matla, Mpa | ASTM D790 | 70-75 |
| Tensile modulus, MPa | ASTM D638 | 2,599-2,735 |
| Matla a tsitsitseng, MPa | ASTM D638 | 39-56 |
| Elongation nakong ya khefu | ASTM D638 | 13 -20% |
| Karolelano ea Poisson | ASTM D638 | 0.4-0.43 |
| Matla a ts'ebetso a notletsoe Izod, J/m | ASTM D256 | 35-45 |
| Mocheso oa ho kheloha mocheso, ℃ | ASTM D 648 @66PSI | 62 |
| Phetoho ea khalase, Tg ℃ | DMA, E”tlhōrō | 73 |
| Coefficient ea katoloso ea mocheso, /℃ | TMA(T | 95*E-6 |
| Boima ba 'mele, g/cm3 | ? | 1.16 |
| Dielectric Constant 60 Hz | ASTM D 150-98 | 4.6 |
| Dielectric Constant 1 kHz | ASTM D 150-98 | 3.9 |
| Dielectric Constant 1 MHz | ASTM D 150-98 | 3.6 |
| Matla a Dielectric kV/mm | ASTM D 1549-97a | 14.9 |
Tlhokomeliso: mocheso oa szuv-w8006 ha oa lokela ho ba o phahameng haholo. Ka kopo e sebelise ka tlase ho 25 ℃. Mocheso o khothalletsoang hore o sebelisoe le ho o boloka ke 18-25 ℃.
?
